Description

CHARACTERISTICS

Fine gypsum-based finishing mortar with special additives that ensure excellent workability, high adhesion and a smooth, uniform final surface. Suitable for interior walls and ceilings in areas with normal humidity. Recommended for levelling and finishing mineral substrates before painting, wallpapering or ceramic tile installation. Single-coat application. Fine texture and optimal working time (30–40 minutes).

MIXING INSTRUCTIONS

Mix the product with clean water until a smooth, lump-free paste is obtained. Mixing can be done manually or mechanically at low speed. The consistency may be adjusted by adding water or dry material, depending on requirements and working conditions.

Application

The substrate must be clean, dry and free of contaminants. Apply the material manually or mechanically in an even layer. The working time is approximately 30–40 minutes. The final surface becomes smooth and ready for finishing. Painting or wallpapering should be carried out only after complete drying, which may vary between 2 and 30 days depending on thickness, temperature and ventilation. Recommended layer thickness: 5–50 mm.

CURING CONDITIONS:

Curing occurs through gradual water evaporation. Ensure constant temperature and adequate ventilation, and avoid strong drafts. Full drying may take between 2 and 30 days, depending on layer thickness and environmental conditions

WORKING TEMPERATURE:

+5°C to +30°C (for substrate, material and ambient temperature).

CONSUMPTION

Approximately 0.9–1.1 kg/m² per 1 mm layer thickness.

Storage

Store in the original packaging, in dry areas protected from moisture and rain, at temperatures between +5°C and +35°C.

SHELF LIFE:

12 months from the date of manufacture, in the original 20 kg packaging