INTENDED USE:
Thin-layer masonry mortar designed for the installation of precision-ground masonry units (ground brick, rectified ceramic blocks, AAC and other compliant units), for load-bearing and non-load-bearing walls, suitable for interior and exterior applications; the product is formulated for reduced-thickness application, ensuring precise alignment of units and mechanical resistance corresponding to class T-M5, enabling fast execution with reduced material consumption; not intended for reinforced masonry or areas subject to special structural loads.
CHARACTERISTICS:
Very good adhesion, high plasticity and excellent workability; cement-based mixture with 0.3 mm graded sand and plasticizers, suitable for interior and exterior works.
PREPARATION AND APPLICATION:
The substrate must be clean, stable, slightly moistened and properly primed; the mixture is prepared by adding 0.2 litres of water per 1 kg of product, mixing for 3–5 minutes, resting for 5 minutes and remixing briefly until homogeneous; the mortar is applied and levelled, and after the initial set the surface is lightly moistened and coarse-floated for compaction; recommended coat thickness: 8–20 mm; avoid strong heaters, dehumidifiers or direct sunlight to prevent cracking.
WORKING TEMPERATURE:
+5°C to +30°C.
CONSUMPTION:
1.6 kg/m² per 1 mm joint thickness.2/1 mm de grosime a rostului
STORAGE:
Delivered in 25 kg bags; store in a dry, ventilated place at +5°C…+25°C, protected from moisture.
SHELF LIFE:
12 months from the production date.
A: Romania, Prahova County, Barcanesti
Barcanesti Village, Crinilor Street No. 61
E: contact@eurozid.com
Reviews
There are no reviews yet.